UPPOAVA -LED PANEL 600x600 is very slim and aesthetically pleasing with changeable light colour between 2500K and 6500K (control unit included). Panel is water resistant (IP54).
Light emission for UPPOAVA LED PANEL 600 36W is over 3000 lumens. That is equivalent to 250W halogen. With PANEL 600 you save up to 86% in electricity (compared to incandescent). Also as the light life is over 50.000 hours, you'd need to change your incadescent bulb around 50 times!
UPPOAVA LED PANELs have a mattee opal acrylic diffuser to make the light nice and soft. With this light, there are no visible led dots, only even light. The body is also white which makes it to nicely blend in to white ceilings.
The light colour can be changed between 2500K and 6500K with VaLO-series RGB/CCT receiver and rotary button. Control unit included.
Basic UPPOAVA LED PANEL 600 is a recessed light. Installation hole should be 583x583mm. Driver can be placed maximum of 5m from the light (if you make the wires longer). A driver comes with every PANEL 600 light. LED PANEL is 13mm thick, so it fits to most of the ceiling structures (basic plaster board is similar in thickness). We recommend that you install a plaster board on top of the PANEL if the steam lock has been installed loosely. The LED PANEL needs 10-20mm air space on top of the light.You don't need any protection cups etc. when using led lights as the temperature of the light never exceeds 80 celsius.
If you need surface mounted light, you just order a frame with this light. Surface mounting frame is available for this product. Frame is 50mm in height and fits the driver inside.
The reason we have decided to have the driver separate from the body is that this way the driver does not add up to the lights heat load and this makes the light last longer. The driver is included and has a quick connector for easy installation.
Dimming and colour change
Includes VaLO-series CCT/RGB receiver and push button, that you can change the light temperature of the panel with. The colour temperature can be changed between 2500K and 6500K.CW to make it cooler, WW to make it warmer. To dim the light, press the sun symbol on the bottom left corner and when you press it again, it will start to either brighten or to dim the light (going different way than on previous pressing). Receiver and button have been added as a default (ticked boxes), if you remove either one, the product will not work as planned UNLESS you have previously ordered ie. the push button and now want to just order a Panel and a receiver.
Why choose LED PANEL 600?
Pleasant, even light
Outstanding guarantee: 5 years for lights, 3 years for drivers
Colour changeable CCT
Safe and durable (CE and RoHS certified)
Minimalsitic design lasts time
Can be used in almost all indoor and outdoor spaces (not in sauna)
Water resistant IP44