Dimmable and water resistant (IP54) surface mounted LED PLAFOND 160 is bright and suits well with modern interiors. This light is suitable to be used indoors as well as outdoors and bathrooms. With this light it is easy to create a uniform lighting for the whole house.
PLAFOND 160, 12W gives 800 lumens. Led circuits are attached straight to the body, so they will relieve the excess heat away from the led circuit and make it long lasting (50000h).
Colour rendering index (CRI) is over 90 and good quality components make sure the colour stays as it is. Available in 3000K warm white and 4000K neutral white.
Body is painted white and the diffuser is matte white acrylic, which guarantees and even light with no stark shadows.
Surface mounted PLAFOND 160 does not mind if it gets cold outside as leds work even better in cold, last longer and shine brighter.
This LED PLAFOND 160 is surface mounted and covers nicely the typical hole on the ceiling. Driver inside the body. First attach the frame to the ceiling, then connect the wires (230V) and the just push the light to the frame. The light stays cool, so it can be installed on wood or plaster. Installing lights is electrial work.
Dimming can be done with rotatable primary side dimmers like Schneider EXXACT and ABB Impressivo dimmers. Check out tested dimmers from here.
LED PLAFOND is compatible with house automation like KNX and Talomatti.
Why choose LED PLAFOND 160?
- Modern and minimalistic look
- Good lighting power
- CRI over 90
- Can be used indoors and outdoors (IP54)
- 5 year guarantee
- Even light
- Dimmable with most regular (affordable) dimmers
- CE, RoHS and SELV certified
|Color temperature (K)||3000, 4000|
|Guarantee (year)||5 years|
|Colour rendering (CRI ±3)||90|
|Approved||CE, RoHS, IP54, although part of the products are labelled IP21|
|Muuta||Driver inside the body, dimmable|
|Mounting Method||Surface mounting|