LED PLAFOND 200 is very slim and aesthetically pleasing, dimmable and water resistant. Available in 3000K and 4000K.
Panel light that is fully recessed and with the latest led technics. All lights used at homes should have CRI over 80, so that the light looks natural. These panels have CRI over 90!
LED PLAFONDs have a mattee opal acryl as a diffuser to make the light nice and soft. With this light, there are no wisible led dots, only even light. The body is also white (mattee) which makes it to nicely blend in to white ceilings.
LED PLAFOND 200 has 15W leds and gives over 1300 lumens. That is equivalent to two 11W fluorescent tubes. With LED PLAFOND 200 you save up to 86% in electricity (compared to incandescent). Also as the light life is over 35.000 hours, you would need to change your incandescent bulb around 35 times!
LED PLAFOND 200 is a recessed light. Installation hole should be 185mm. The driver is included. LED PLAFOND is 22mm thick with springs, so it fits to most of the ceiling structures. We recommend that you install a plaster board on top of the PANEL if the steam lock has been installed loosely. The LED PLAFOND needs 10-20mm air space on top of the light. You don't need any protection cups etc. when using led lights as the temperature of the light never exceeds 80 celsius.
The reason we have decided to have the driver separate from the body is that this way the driver does not heat up the light and this makes the light last longer. Driver is dimmable and with fast connection.
|Color temperature (K)||3000, 4000|
|Guarantee (year)||3 years|
|Colour rendering (CRI)||90|
|Model||Plafond 200 dimmable|
|Dimensions||200mm, Installation cut out 185mm, height 22mm|
|Approved||CE, RoHS, IP44|
|Other||Driver Included, dimmable|