UPPOAVA -Panel 300x1200, 36W, selectable colour temperature 3000K-4000K-6000K, is very slim and aesthetically pleasing, fully dimmable and water resistant multitasker! Suit well in bathrooms, kitchens as in terrace.
It is recommended that one chooses home lighting to be at least 90 CRI, in order to have natural looking colours. The colour rendering index (CRI) is 97 (Full spectrum!) which means that the colours of your interior will look brilliant, as they are supposed to. The panel has a selectable colour temperature 3300K, 4300K and 5800K, so you can change it yourself from an individual fixture. You can always match correct light colour temperature for you decor from DIP switch from the driver. CW- 5800K, DW- 4300K, WW- 3300K.
By selecting wireless CCT controller and mA 50W driver, you can adjust light temperature seamlessly with remote.
Light emission for UPPOAVA LED PANEL 300x1200 36W is over 3000 lumens. That is equivalent to 250W halogen. With PANEL 300x1200 you save up to 86% in electricity (comparend to incandencent). Also as the light life is over 50.000 hours, you'd need to change your incadecet bulb around 50 times!
UPPOAVA LED PANEL has a mattee opal acryl as a diffuser to make the light nice and soft. With this light, there are no wisible led dots, only even light. The body is also white which makes it to nicely blend in to white ceilings.
UPPOAVA LED PANEL 300x1200 is a recessed light. Installation hole should be 295x1195mm. Driver size is 195x45x33mm and the driver cables can extended with 3-conductor cable. The driver comes with every PANEL light. LED PANEL is 13mm thick, so it fits to most of the ceiling structures (basic plaster board is similar in thickness). We recommend that you install a plaster board on top of the PANEL if the steam lock has been installed loosely. The LED PANEL needs 10-20mm air space on top of the light.You don't need any protection cups etc. when using led lights as the temperature of the light never exeeds 80 celsius.
If you need surface mounted light, you just order a frame with this light. The driver fits inside the frame. It's also possible to order the light as a suspended model with cable length of approx. 1,5m.
The reason we have desided to have the driver separatre from the body is that this way the driver does not add up to the lights heat load and this makes the light last longer. The driver is included and has a quick connector for easy installation.
UPPOAVA LED PANEL 300x1200 can be used with house automatics (ie. KNX and Talomatti).
Surface mounting frame is available for this product. Frame is 50mm in height and fits the driver inside.
As it is perfectly dimmable between 10-100%, it makes you the master of moods. Dimming with TRIAC dimmers from PRIMARY. Suitable dimmers in our shop: Schneiderin EXXACT ja ABB Jussi. The colour temperature is selected from the driver and then the dimming can be operated with these basic dimmers.
Why choose LED PANEL 1200?
- pleasant, even light
- Perfectly recessed
- Superb colour rendering index CRI of 97
- Outstanding guarantee: 5 years for lights
- Colour temperature selectable
- Energy efficient
- Safe and durable (CE and RoHS certified)
- Minimalsitic design lasts time
- Can be used in almost all indoor and outdoor spaces (not in sauna)
- Water resistant IP54
- Easy to install
Valaisin upotetaan kattoon tai asennetaan pinta-kehykseen. Upotettaessa asennusaukon tulee olla 285x1185mm. Itse valaisin on 295x1195x22mm ja lisäksi erillinen virtalähde, jossa kytkin valon varisavyn vaihtamiseen. Virtalähde mahtuu pinta-asennuskehykseen sisälle.
Valaisin mahtuu tyypilliseen kattorakenteeseen, jossa höyrynsulun alla on vain 48x48mm koolaus ja 13mm kipsilevy. Mikäli höyrynsulku on asennettu löysälle, suosittelemme asentamaan valaisimen yläpuolelle laudan tai kipsilevyn estämään eristeen painumista. Ledin lämpötila ei nouse korkeaksi, joten palonsuojausta ei tarvita. Led valaisinta ei suositella kuitenkaan asennettavaksi kiinni mihinkään materiaaliin ja ilmatilaa voi jättää esim. 1-2 cm.
Valaisimeen on saatavana pinta-asennuskehys joka on 50mm korkea. Muuntaja mahtuu kehyksen sisälle.