Touch dimmer for led strip. Perfect solution for under the cabinet lights in kitchens or other systems with no wall switch (night lights at bedroom, wardrobe lights etc.).
Is suitable to be used with strips with voltage: 12-24V
With 12V led strips, max.36W load and with 24V led strips max. 72W load (3A).
Solder between the strip and the driver (12-24V input and 12-24V output).
1. Make sure you use constant voltage driver instead of constant current driver. Have the power off when soldering.
2. Make sure the positive "+" and the negative "-" are correctly connected to led power supply (led driver). Positive and negative cannot be reversed!
3. Make sure the spring will not contact any metal object to avoid malfunction.
If you install touch dimmer on a led strip inside the profile, you can remove cords from the side of the led strip, so that the soldering connects the dimmer and the strip next to each other! See video.
Spring height: 18mm (can be shortened)
|Color temperature (K)||No|
|Volt (V)||12, 24|
|Guarantee (year)||1 year|
|Colour rendering (CRI)||No|
|Dimensions||10x42mm, spring height 18mm (can be shortened)|
|Other||Solder the dimmer block between strip and driver.|