Sale / Store
+358 45 251 4510

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • Muutamia vaihtuvan ohjelman väreistä. Muutamia vaihtuvan ohjelman väreistä.

LED RGBW STRIP SMD 5050, 14,4W/m (72W/5m) 24V, water resistant IP65

Quick Overview

This led strip uses RGB circuit with the CRI around 83 with (White colour). The led strip is dimmable and waterproof with a surface that does not turn yellow.


Availability: Backorder

Ask a question


High quality 24V RGB led strip!

This led strip uses RGB circuit with the CRI around 83 with (White colour). The led strip is dimmable and waterproof with a surface that does not turn yellow. As a tape, it uses 3M tape that is extra durable and attaches the strip firmly. Led strip 14,4W/m is equivalent to 120cm fluorocent tube, so you'll even save energy!


The strip is controlled with our VaLO series remote, where you can select one of the 28 programmes available. The product can be seen at our showroom in Vantaa Koivuhaka. Our favourite programme is 7 colour fade, where the light changes calmly from one colour to another. 

This strip is mostly used in indirect lighting and for creating different moods. Perfect for spas, bars and terraces, also we have noticed that kids love this led strip. RGB led strip has 14,4W/m and has 60 led circuits on a meter. This makes the light even, if installed in a way you cannot see the light source ie. indirect light. When installed on an aluminium profile, there are visible dots to be seen if looked straight to the light (not visible when installed next to a wall). And as the CRI is over 83, which is suitable to be used in homes.


LED strip comes in a 5m roll that can be cut to measure in every 5cm. We recommend that you solder the wanted lengths together as we have noticed that the fast clips tend to loosen after few years and then the light starts flickering. There are plugs soldered to both ends of the strip. We will help you with any installation questions.

If you have more than 10m of RGB led strip, you need to feed the power from both ends to minimize the powerloss. All installations should be made on top of aluminium (ie. aluminium profile), that way the excess heat gets conducted away from led circuit and makes it last longer.

LED strip works well with solar power and in boats and cars, as it is 24VDC you might not even need a driver!

Remember to order a 24V driver. For the whole 5 meters you need a minimum of 80W driver.


LedStore's RGB led strip comes with touch screen remote and controller box. This is a perfect solution also in places where you have power for the strip but no wall swich ready. With this system, you just hook the wireless receiver between led strip and driver and have the remote were ever you like. You can also choose a 100W or 200W RF driver that contains a receiver, and use it with a VaLO series RGB dimmer.

Create a light of your own

Why would you use led strip only in traditional way (cabinets, indirect light etc.) when you can make a light of almost anything. Old cart wheel, zink bucket or even a wooden boat turns in to a light when you put led strip inside it! Get creative!

Light colour temperature

RGB (red, green and blue) and neutral white colour (4000K).

Additional Information

SKU stripRGBW-24v
Color temperature (K) 4000
Color N/A
Volt (V) 24
Guarantee (year) 3 years
Colour rendering (CRI ±3) 85
Model RGB STRIP144-24
Lumens 5000
Light angle N/A
Power (W) 72
Life Time 35000
Dimensions 10x5x5000mm (roll)
Installation hole No
Product diameter No
Package lenght 5
Product width 5000
Product hight 10
Approved CE, RoHS, IP65
Energy Class A++
Other 3M tape on backside
IP Class IP65
Chainable No
Color No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

Product Questions

No Questions

Also Purchased