Dimmer for led strips with remote control. The rotary dimmer will be installed between the driver and the leds. There are different options on the remote for control:
ON/OFF = Truns lights on and off.
Delay OFF = Lights turn off after 30s.
Brightness control = Press [ - ] once and the light will decrease two grades. There are 255 levels in total.
HOTKEYs for 25%, 50%, 75% and 100% light levels.
You can set up four different light levels of your choise on the SCENE section. Press the a key with desired number for 3 seconds, then the indicator light flickers once which confirms that the current brightness is saved under that number.
NOTE! You need to point the remote to the wall piece as the remote works with infrared. The light on the dimming box flickers when you dim the lights to let you know the infrared of the control reaches the dimming box.
You can also dim the lights also manually from the rotary button.
Working temperature: -20-60°C
Supply voltage DC12-24V
Dimmer size: 86x86x53mm
Static power consumption: <0.5W
Output current: 8A
Output power: 12V <96W or 24V <192W
|Color temperature (K)||No|
|Volt (V)||12, 24|
|Guarantee (year)||1 year|
|Colour rendering (CRI)||No|
|Model||Remote dimmer with infrared|
|Dimensions||Dimmer box 86x86x53mm|
1. Connect the load wire first (led strip). Be careful to connect [ + ] and [ - ] correctly. Then connect power wire (from driver). Please ensure short circuit can not occur between connecting wire before you turn on the power.
2. Connect the driver to main power.
3. Remote control works with infrared, so make sure there are no obstacles in front of the dimmer box. When remote receives an effective signal, the light on top of the dimmer box will flicker.