Product was successfully added to your shopping cart.
LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org

LED CCT STRIP 14,4W/m, 24V complete set

€377.00

(Out of stock)

  • LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org
  • CCT led strip 14.4W/m 24V CCT led strip 14.4W/m 24V
  • Cut marks every 10cm Cut marks every 10cm
  • Driver 120W 24V Driver 120W 24V
  • Aluminium profile, surface. Aluminium profile, surface.
  • Aluminium profile measurements. Aluminium profile measurements.
  • LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org
  • LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org
  • LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org
  • LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org LED CCT STRIP 14,4W/m, 24V complete set, STRIP-CCT-14.4W-SET by LedLightStore.org

LED CCT STRIP 14,4W/m, 24V complete set

Quick Overview

This led strip uses two led circuits which enables the change in colour temperature between 2500K-6500K. The CRI around 90, and it shows colours naturally (when in 4000K, the colours are not "tinted" to yellow or blue). 


This set includes led strip with colour temperature between 2500-6500K (adjustable), wireless dimming/colour changing button&receiver, 120W driver and two aluminium profiles.

Availability: In stock

Details

High quality 24V CCT led strip!

This led strip uses two led circuits which enables the change in colour temperature between 2500-6500K (everything from warm yellowish white to cold, bluish white). The CRI around 90, and it shows colours naturally (when in 4000K, the colours are not "tinted" to yellow or blue). The led strip is dimmable and colour temperature can be changed with the VaLO series button+receiver combo that is included in this package. As a tape, it uses 3M tape that is extra durable and attatches the strip firmly. Led strip 14,4W/m is equivalent to 120cm fluorocent tube, so you'll even save energy!

Lighting

The strip can be controlled with VaLO -series push button dimmer (CCT) and receiver (RGB/CCT) that are included in the package. The products can be seen at our warehouse store.

This strip is mostly used in indirect lighting and for creating different moods. CCT led strip has 60 led circuits on a meter. This makes the light even, if installed in a way you cannot see the light source ie. indirect light. When installed on a profile, there are visible dots to be seen if looked straight to the light (not visible when installed next to a wall, so tat the strip is not visible).

Installation

LED strip comes in a 5m roll that can be cut to measure in every 10cm. We recommend that you solder the wanted lengths together as we have noticed that the fast clips tend to loosen after few years and then the light starts flickering.

If you have more than 10m of strip, you need to feed the power from both ends or from the centre to minimize the powerloss. All installations should be made on top of aluminium (ie. aluminium profile, included in this set), that way the excess heat gets conducted away from led circuit and makes it last longer.

LED strip works in boats, as it is 24VDC you might not even need a driver, but it is included in this set.

Dimming

LedStore's CCT strip can be dimmed and adjusted with wireless VaLO -series controller and receiver (CCT). This is a perfect solution also in places where you have power for the strip but no wall swich ready. With this system, you just hook the wireless receiver between led strip and driver and have the remote were ever you like.

  • To turn on and off, press the top left corner
  • To dim the lights, press bottom left corner for long time. When you press long again, it will start brightening.
  • Press top right to make the light colour warmer and bottom right to make it cooler.

Create a light of your own

Why would you use led strip only in traditional way (cabinets, indirect light etc.) when you can make a light of almost anything. Old cart wheel, zink bucket or even a wooden boat turns in to a light when you put led strip inside it! Get creative!

Set includes:

  • 5 metres of (CCT) colour temperature changeable led strip, 14,4W/m
  • 120W driver
  • 2x2500mm long, surface mounted aluminium profiles (with diffuser, end caps and clips)
  • VaLO push button for CCT lights
  • VaLO receiver for CCT (and RGB) lights

Additional Information

SKU STRIP-CCT-14.4W-SET
Color temperature (K) 2500, 2700, 3000, 3500, 4000, 6000, 6500
Color Brushed
Volt (V) 24
Guarantee (year) 3 years
Colour rendering (CRI) 90
Model CCT-strip-24V-14.4W-set
Lumens 5000
Light angle No
Power (W) 72
Life Time 35.0000h
Dimensions Strip: 8x3x5000mm Profile: 17x6x2500mm
Installation hole No
Product diameter No
Package height No
Product width No
Product depth No
Approved CE, RoHs, IP21, SELV
Energy Class A++
Other Dimming with RF signal
IP Class IP21

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality

For the CCT ability to work, you need a wireless button and a receiver.

LED strip comes in a 5m roll that can be cut to measure in every 10cm. We recommend that you solder the wanted lengths together as we have noticed that the fast clips tend to loosen after few years and then the light starts flickering.

If you have more than 10m of strip, you need to feed the power from both ends or from the centre to minimize the powerloss. All installations should be made on top of aluminium (ie. aluminium profile), that way the excess heat gets conducted away from led circuit and makes it last longer.

LED strip works in boats, as it is 24VDC you might not even need a driver!

Remember to order a driver (unless it is for a boat, car or with solar power of 24VDC).