Adjustable LED LIGHT SET (silver) is perfect for accent lighting and for highlighting wall textures. We do not recommend this spot to be used in a general lighting, but instead in complimentary lighting.
Our LED LIGHT SET uses Cree led circuits with CRI over 85. One 3W lamp is equivalent to 15W halogen and that is 200 lumens. This model is available in 3000K and 4000K light colour. Aslo available in White version.
We give this light set a 5 year guarantee.
Special order IP44 available.
Can be installed in a very small space. The height of one led spot is 30mm (33mm when tilted). The cut out size is 41-45mm. The led spot can be tilted 0-15 degrees. This LED LIGHT SET fits to typical ceiling structure where there is 48x48mm frame and 13mm plaster board. We recommend you to install plaster board or such on to of the spot if there is a possibility thta the insulation will press the led spot down.
LED LIGHT SET comes with a dimmable driver. Driver does not fit in from the light holes, so you need to make a maintenance hole into the ceiling or nearby wall for maintenance. All sets are build to order, so the have the right size driver included depending on the amount of lights. Measurements of the driver are 110x50x35mm. There is a cable of 1,4m between each light and the driver. Driver has a black test cable, taht should be removed when installed to main (230V).
ALWAYS INSTALL ALL LIGHTS ORDERED TO THE DRIVER!
The 3-4 set, 5-6 set and 7-8 set all have a different driver, so if not all lights are installed, the driver and the lights might break. Taking out one light will cut off light to other laps as well. If you descover you have ordered the wrong set or want to place the lights you ordered in a different way, please be in contact and we will sort you out.
Driver is not water resistant, so it should be installed to a dry place.
Driver can be ordered with plug (special order) or IP44!
LED LIGHT SET comes with a dimmable driver that can be dimmed from primary side with rotatable wall dimmers. The set goes well together with house automation as KNX and Talomatti.
|Color temperature (K)||3000, 4000|
|Guarantee (year)||5 years|
|Colour rendering (CRI ±3)||90|
|Mitat||Installation hole 40mm, lamp diameter 51mm, lenght 30mm|
|Approved||CE, RoHS, IP21|
|Muuta||Driver Included, dimmable|
Write Your Own Review